| Usage: | Telephone, Computer, Workstation, Server, Mobile phone, Laptop |
|---|---|
| Type: | Wired |
| Support Network: | Ethernet |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier This is a Webitelecomms lossless OVER IP KVM HDMI optical network extender uses CAT6/7 cable or optical fiber to transmit video, audio and KVM signals among multi- computer rooms/data centers. Video quality can be in desktop-class applications, and break through the limitation of transmission distance based TCP/IP protocol, Ensure lossless on vision, hear and control; Delay free experience, ensure the quality and efficiency of control.
Features:
I.Audio/video, serial port, Infared RS232, USB keyboard&mouse, USB flash are extend through network or Optical fiber;
II.CAT6 / 7 network cable can be used to transmit more than 100 meters, and can be extended infinitely through the switch;
III.With routing switching function, it can pass through the network switch and support 32 groups of pairing through the dial switch;
IV.Support Unicast mode and Multicast mode (one to one, one to many);
V.Supports maximum UHD UHD resolution: 4kx2k@30Hz;
VI.SupportsHDMI1.4&HDCP2.2;
VII.Automatic detection of display mode and DDC synchronization function, automatic display of the best resolution of the back-end display;
VIII.Lossless video compression algorithm based on patent authorization;
IX.Support USB2.0 full rate transmission function;
X.Transmission delay < 80us;
Technical advantages
*Lossless display without delay
* This Webitelecomms HDMI KVM extender optimizes the image quality and transmission delay respectively based on the patented video compression algorithm, which can ensure the lossless display of the image and transmit with a delay less than 80us 1080p@60hz/4kx2k@30Hz HD Ultra HD real-time image, as if in the local direct connection viewing experience
Specification:
LBX-1600T(Transmitter)
| Video | |
| Signal Protocol | HDMI1.4b,TMDS Signal |
| Physical interface | HDMI TYPE A |
| Max Resolution | 4096x2160@30Hz(RGB444 format), 4096x2160@60Hz(YUV420), 2560x1080@120Hz (RGB444) |
| H D C P | HDCP1.4 & HDCP2.2 |
| Pixel bandwidth | 300MHz,all-digital |
| Interface bandwidth | 12Gbps |
| signal intensity | TMDS +/-0.4Vpp |
| Minimum maximum level | TMDS 2.9V/3.3V |
| Impedance | Differential 100 ohm |
| HDMI wire input distance | Less than10m,Certified HDMI wire is recommended |
| Audio Interface | |
| Audio Input | 3.5mm audio jack |
| Audio output | 3.5mm audio jack |
| Gain | 0dB |
| frequency response | 20hz-20khz |
| Signal type | stereo |
| impedance | Input >10kohm; output 50 ohm |
| Maximum input level | 3Vpp |
| USB Interface | |
| Type | Type B seat |
| Signal Type | USB Signal |
| Agreement | USB2.0 |
| transmission speed | 480Mbps |
| RS232 Interface | |
| Connector | 3.5mm phoenix jack |
| Baud rate | 115200bps |
| Signal Type | Digital TTL |
| Level type | RS-232 level |
| Signal direction | Two way communication |
| network interface | |
| Connector | High speedRJ45 |
| Protocol | TCP/IP |
| Transmission Distance | use of CAT6/7 shielded wire can be more than 100 meters,Access switch without distance limit |
| Transmission delay | <80us |
| Fiber Interface | |
| Connector | SFP fiber connector, LC fiber |
| Type | Multimode or single mode |
| Wavelength | Multimode:850nm Singlemode: 1310nm |
| Protocol | TCP/IP |
| Rate | 1.25Gbps |
| Specifications | Multimode: 50/125um Singlemode: 9/125um |
| Transmission Distance | Multimode less than 300m, Single mode:2km~80km |
| Specifications | |
| Power | 12V/2A |
| Power waste | <=10W |
| Temperature | Working temp: 0~50 degree,Storage temp: 20~70 degree |
| Humidity | 10%~90% |
| Size | 13.5cm X 11cm X 3cm (L x W x H) |
| Mean time between failures | 30000 hours |
LBX-1600R Receiver
| Video Interface | |
| Signal protocol | HDMI1.4b,TMDS Signal |
| Physical interface | HDMI TYPE A |
| Max Resolution | 4kx2k@30Hz |
| H D C P | HDCP1.4 & HDCP2.2 |
| Pixel bandwidth | 300MHz, all-digital |
| Interface bandwidth | 12Gbps |
| signal intensity | TMDS +/-0.4Vpp |
| Min max level | TMDS 2.9V/3.3V |
| Impedance | Difference 100 ohm |
| HDMI wore input distance | Less than 10m, Certified HDMI wire is recommended |
| Audio Interface | |
| MIC Input | 3.5mm Audio Jack |
| Audio Output | 3.5mm Audio Jack |
| Gain | 0dB |
| frequency response | 20hz-20khz |
| Signal Type | Stereo |
| Impedance | Input >10k ohm; Output: 50 ohm |
| Maximum Input Level | 3Vpp |
| USB Interface | |
| Connector | 4 type a double deck seats |
| Signal Type | USB Signal |
| Protocol | USB2.0 |
| Transmission Speed | 480Mbps |
| Transmission Delay | <80us |
| RS232 Interface | |
| Connector | 3.5mm Phoenix Jack |
| Baud Rate | 115200bps |
| Signal Type | Digital |
| Level Type | RS-232 Level |
| Signal Direction | Two way communication |
| Network Interface | |
| Connector | High speed RJ45 |
| Protocol | TCP/IP |
| Transmission Distance | Up to 100 meters with CAT6 shielded wire, Access switch without distance limit |
| Fiber Interface | |
| Connector | SFP fiber connector, LC fiber |
| Type | Multimode or Singlemode |
| Wavelength | Multimode: 850nm Singlemode: 1310nm |
| Protocol | TCP/IP |
| Rate | > 1.25Gbps |
| Specification: | Multimode: 50/125um Singlemode: 9/125um |
| Transmission Distance | Multimode: less than 300m; Singlemode: 2km~20km |
| Specification | |
| Power | 12V/2A |
| Power waste | <=10W |
| Temperature | Working temp: 0~50 Degree, Storage temp: -20~70 degree |
| Humidity | 10%~90% |
| Size | 13.5cm X 11cm X 3cm (L x W x H) |
| Mean time between failures | 30000 hours |
=Shipment & Delivery
Our Services:
Sample Service: We will collect some sample fees, will refund after you place order.
Package design support: We have brand team for your customized design
Company Information:
WEBITELECOMMS was built in 2003 and was awarded the rights of import and export in 2010.
Products range: 19" racks and cabinets, outdoor cabinets, structured cabling, fiber optic , PDU, KVM and Fiber media converter
Audit Report: CE,ROHS,ISO,SGS.
Showroom: About 100 square meters showroom.
Welcome to WEBITELECOMMS, believe that our professional team and service will help you stay step ahead in the market.
FAQ:
1) If the KVM extender used as residential electrical device?
---Yes, the producrt can be treated as home used extender
2) What is your Trade term?
---EXW, FOB, CNF, CIF, even DDU are available
3) Where's is the nearest Loading Port?
--- Ningbo,Shanghai.
4) What is your MOQ?
--- usually 100 pcs as our accessories products MOQ , different items will be different. We have indicated the MOQ for each item
in the price list.
5) How we trust Webitelecomms
---As Europe market, we have CE RoHS and other international safety standard for our products.
---As other market,international safety standard certificate also could be provided.
---2 years standard WARRANTY for mostly Webit products
6) How to customize the KVM extender
---Contact sales for more bespoke design
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}